| QuestionHow do I enable Turbo mode to get the maximum Turbo mode speed on my X10DRi motherboard? |
| AnswerPlease make sure the following settings are correct: 1. Please make sure all cores are enabled: Advanced >> CPU Configuration >> Core enabled >> “0” to enable all cores. 2. Under the Bios setup go to: Advanced >> CPU Configuration >> Advanced Power Management and make sure the setting are as follows: Power Technology >> Custom Energy performance Tuning >> disable Energy performance BIAS setting >> performance Energy efficient turbo >> disable 3. Then go to Advanced >> CPU Configuration >> Advanced Power Management >> CPU P state control and make sure the settings are as follows EIST (P-States) >> Enable Turbo mode >> enable P-state coordination >> HW_ALL 4. Then Advanced >> CPU Configuration >> Advanced Power Management >> CPU C state control and make sure the setting are as follows. Package C-state limit >> C0/C1 state CPU C3 Report >>disable CPU C6 report >> enable Enhanced Halt state >> disable 5. Save the changes and exit and now you should be able to get the Max Turbo mode speed. |
